How To Get Soap Out Of Carpet (Simple Steps)

It’s always frustrating when it happens. You just made a nice warm tea or a cold coffee, or anything really, and you drop it. What was supposed to be a good refreshment after a hard day’s work, turns into a chore.

You first thought is soap, after all, it is one of the best things to get everything out of the carpet and ensure that there are no stains after. But let’s say you’re done cleaning, but there’s still some soap left in the carpet, how do you remove it and should you?

As you might imagine it’s not that easy if you don’t have a slurry vacuum. We’ll go over how to do it with a water vacuum and without.

Note: Whatbrandreview is reader-supported. When you buy through affiliate links on our website, we’ll make a small commission, without impacting your price. Thank you. Learn more.

Things You Need

The things that you will need are simple household items. Now, if you have a water vacuum, skip right ahead to the “Water Vacuum” section.

If that’s not the case, these are the things that you will need:

  • A couple of paper towels;
  • Cloths;
  • Warm water;
  • Regular vacuum.

Step 1 – Wipe Off Soap

For the first step, you’ll need to get rid of as much soap as you possibly can with some paper towels. Grab a couple then start wiping the spot. Rinse and repeat this step until the majority of the soap is out.

Make sure to regularly change paper towels and grab fresher- dry ones.

NOTE: Some soaps have a bigger tendency to work themselves into the fibers of the carpet. That’s why it is always a good idea to invest in some more higher-end soaps from the likes of Blueland, Dropps & Tru Earth.

Step 2 – Pour Some Warm Water

Get a moderate amount of water and dump it onto the carpet. It doesn’t have to be much, just enough to cover the affected area.

With a dry cloth gently blot out the area as much as possible. Fold the dry cloth regularly.

All you have to do is repeat this step 3-4 times, and the soap should naturally disappear. But don’t dump too much water onto the carpet.

Step 3 – Dry & Vacuum

Once you’re done with the second step, give the affected area a final blot with a couple of dry paper towels, and let the carpet airdry.

Once it’s completely dry, go over it with a regular vacuum. This is to remove any soap that might’ve dried up.

NOTE: Even if you don’t get all of the soap out, soap rarely does any damage to carpets overtime. It will also not cause any unwanted smells or visible stains, but it’s still good practice to remove as much of it as possible.

Water Vacuum

This is the best case scenario. With a water vacuum you’ll pretty much get all of the soap out.

Just repeat the second step from above and then instead of drying it off, pour some warm water into the carpet. You can even add a little bit more around the affected area.

Then, it’s only a case of sucking out all of the water remaining in the carpet. Do a couple of passes like 4-5 times, which should be enough.

READ NEXT : Hum VS Flo VS Bonafide: Best PMS Vitamins & Do They Work?